So, this afternoon I managed to get the wire harness for the SDS controller through the firewall, along with the AEM boost gauge pressure-sending wire bundle. I wired in the switched-power lead and ground wires for the boost gauge and made sure that the wires for the AEM AFR wideband O2 sensor were all solid. After havind done this, I notice that the AFR readings seem more stable, not bouncing all over the place. This leads me to believe that my orginal connection was not "tight". Maybe a bad ground or power or both.
Saturday, June 20, 2009
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment